NAS1601-018 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NAS1601-018: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN, center_hole_diameter: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-953-1885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1601-018

NSN: 5331-00-953-1885
FSC: 5331 — O-ring
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
center_hole_diameter	0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-953-1885

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 7

NV822201 FIND 84Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

8D173 ITEM 15Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

HTE7300E3-018Reference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1613Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

E0515 2-018Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5331PL1740092Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1601-018?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1601-018?

NAS1601-018 is a O-RING.

What parts can replace NAS1601-018?

There are 7 known substitutes for NAS1601-018: NV822201 FIND 84, 8D173 ITEM 15, HTE7300E3-018 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1601-018?

NAS1601-018 is cataloged in the U.S. Government catalog under NSN 5331-00-953-1885. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1601-018 — O-RING

Request a Quote — NAS1601-018