NAS1595-7 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NAS1595-7: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN, center_hole_diameter: 0.523 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-173-3025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1595-7

NSN: 5331-00-173-3025
FSC: 5331 — O-ring
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN
center_hole_diameter	0.523 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
NSN	5331-00-173-3025

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.523 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.523 INCHES MINIMUM AND 0.537 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 8

5331PL2228038Reference document

Same NSN cross-reference

Reference document — Informative reference only

S9413-557Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83248/1-907Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10374799Reference document

Same NSN cross-reference

Reference document — Informative reference only

AMS3248Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83248-1-907ESReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy NAS1595-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1595-7?

NAS1595-7 is a O-RING.

What parts can replace NAS1595-7?

There are 8 known substitutes for NAS1595-7: 5331PL2228038, S9413-557, M83248/1-907 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1595-7?

NAS1595-7 is cataloged in the U.S. Government catalog under NSN 5331-00-173-3025. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1595-7 — O-RING

Request a Quote — NAS1595-7