PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1593-114
NAS1593-114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, specification/standard_data: 80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-593-8970, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1593-114
NSN: 5330-00-593-8970
FSC: 5330
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
center_hole_diameter0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
specification/standard_data80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5330-00-593-8970
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1593-114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA80205-NAS1593 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
2-114V747-75Interchangeable
interchangeable cross-reference
interchangeable
845-2180961PC16Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-114Interchangeable
interchangeable cross-reference
interchangeable
V3531PC16Interchangeable
Same NIIN cross-reference
interchangeable
FAIRPRENE980-014Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1593-114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1593-114?
NAS1593-114 is a PACKING,PREFORMED.
What parts can replace NAS1593-114?
There are 5 known substitutes for NAS1593-114: 2-114V747-75, 845-2180961PC16, M83248/1-114 and 2 more. Substitute compatibility should be verified for your specific system.
Is NAS1593-114 still available?
NAS1593-114 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1593-114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026