PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1515M06L
NAS1515M06L ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, thickness: 0.026 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN, hole_diameter: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN, overall_diameter: 0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-924-8770, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1515M06L
NSN: 5310-00-924-8770
FSC: 5310
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
thickness0.026 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
hole_diameter0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
overall_diameter0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-924-8770
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1515M06L · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THICKNESS: 0.026 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.144 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THICKNESS0.026 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
END ITEM IDENTIFICATIONAIRCRAFT, B-2 BOMBER (ATB);TARAWA CLASS LHA;AN/GSC-49, JAM RESISTANT SECURE COMMUNICATIONS (JRSC) TERMINAL;MISSILE, AIR-TO-AIR, PHOENIX (AIM-54);HELICOPTER, ELECTRONIC COUNTERMEASURES, EH-60A;SUPPORT EQUIPMENT, B-1 AIRCRAFT;LOW ALTITUDE NAVIGATION & TARGETING INFRARED SYSTEM (LANTIRN);AIRCRAFT, AWACS, E-3A;HELICOPTER, ADVANCE ATTACK, AH-1W;HH-60L MEDIVAC A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
4868Interchangeable
interchangeable cross-reference
interchangeable
150682-1Interchangeable
interchangeable cross-reference
interchangeable
DX100-SERIESInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1515M06L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1515M06L?
NAS1515M06L is a WASHER,FLAT.
What parts can replace NAS1515M06L?
There are 3 known substitutes for NAS1515M06L: 4868, 150682-1, DX100-SERIES. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1515M06L?
NAS1515M06L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-924-8770. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1515M06L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026