PartsTable
Technical Data Sheet
Download PDF

NAS1464-030-10C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

NAS1464-030-10C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, length: 0.360 INCHES MAXIMUM IN, material: STEEL OR COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-487-1305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1464-030-10C
NSN: 5340-01-487-1305
FSC: 5340 — Hardware, Commercial
CAGE: 07421 — L3HARRIS INTERSTATE ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
width0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
length0.360 INCHES MAXIMUM IN
materialSTEEL OR COPPER ALLOY 172 OR COPPER ALLOY 170 OVERALL
hole_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
hole_quantity2
overall_height0.400 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSTANDOFF
surface_treatmentCADMIUM OVERALL
material_thickness0.016 INCHES NOMINAL IN
supplementary_featuresDISTANCE BETWEEN END AND 1ST HOLE 0.200 PORM 0.005; DISTANCE BETWEEN 1ST AND 2ND HOLE 0.600
mounting_facility_diameter0.103 INCHES NOMINAL IN
NSN5340-01-487-1305
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1464-030-10C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.103 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
LENGTH: 0.360 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, CLASS 2, TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SUPPLEMENTARY FEATURES: DISTANCE BETWEEN END AND 1ST HOLE 0.200 PORM 0.005; DISTANCE BETWEEN 1ST AND 2ND HOLE 0.600
•
STYLE DESIGNATOR: STANDOFF
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.103 INCHES NOMINAL IN
OVERALL HEIGHT0.400 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY2
LENGTH0.360 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, CLASS 2, TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
SUPPLEMENTARY FEATURESDISTANCE BETWEEN END AND 1ST HOLE 0.200 PORM 0.005; DISTANCE BETWEEN 1ST AND 2ND HOLE 0.600
STYLE DESIGNATORSTANDOFF
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B194 ASSN STD 1ST MATERIAL RESPONSE OR ASTM B194 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy NAS1464-030-10C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1464-030-10C?
NAS1464-030-10C is a CLIP,SPRING TENSION.
What is the NSN for NAS1464-030-10C?
NAS1464-030-10C is cataloged in the U.S. Government catalog under NSN 5340-01-487-1305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1464-030-10C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.