PartsTable
Technical Data Sheet
Download PDF

NAS1402-29 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS1402-29: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN, screw_material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-143-1329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1402-29
NSN: 5305-00-143-1329
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_stylePAN
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
screw_materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
fastener_length2.135 INCHES MINIMUM AND 2.165 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
NSN5305-00-143-1329
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1402-29 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 2.135 INCHES MINIMUM AND 2.165 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH2.135 INCHES MINIMUM AND 2.165 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
THREAD LENGTH0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy NAS1402-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1402-29?
NAS1402-29 is a SCREW,MACHINE.
What is the NSN for NAS1402-29?
NAS1402-29 is cataloged in the U.S. Government catalog under NSN 5305-00-143-1329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1402-29

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.