PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1397R10B
NAS1397R10B ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: NATURAL COLOR, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-811-9170, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1397R10B
NSN: 5340-00-811-9170
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresNATURAL COLOR
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
loop_inside_diameter0.625 INCHES NOMINAL IN
specification/standard_data80205-NA1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.860 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.580 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
NSN5340-00-811-9170
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1397R10B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.860 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.580 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END0.860 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.580 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
DIAMETER0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
A6852-14Upgraded Successor
successor cross-reference
successor
10012412Upgraded Successor
successor cross-reference
successor
5340009525408Upgraded Successor
successor cross-reference
successor
8642815Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1397R10B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1397R10B?
NAS1397R10B is a CLAMP,LOOP.
What parts can replace NAS1397R10B?
There are 4 known substitutes for NAS1397R10B: A6852-14, 10012412, 5340009525408 and 1 more. Substitute compatibility should be verified for your specific system.
Is NAS1397R10B still available?
NAS1397R10B is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1397R10B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026