PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1397P4CB
NAS1397P4CB ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, temp_rating: 135.0 CELSIUS DEGC, overall_width: 0.500 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-191-7588, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1397P4CB
NSN: 5340-01-191-7588
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
temp_rating135.0 CELSIUS DEGC
overall_width0.500 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
material_document_and_classificationMIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.657 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.457 INCHES NOMINAL IN
NSN5340-01-191-7588
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1397P4CB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.457 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
TEMP RATING: 135.0 CELSIUS DEGC
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.657 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.457 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TEMP RATING135.0 CELSIUS DEGC
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK
DISTANCE FROM LOOP CENTER TO TONGUE END0.657 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
6515873Upgraded Successor
successor cross-reference
successor
47306-9Upgraded Successor
successor cross-reference
successor
NPC-4Upgraded Successor
successor cross-reference
successor
1/4-6Upgraded Successor
successor cross-reference
successor
C005054-501Upgraded Successor
successor cross-reference
successor
F6NY-250BKUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1397P4CB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1397P4CB?
NAS1397P4CB is a CLAMP,LOOP.
What parts can replace NAS1397P4CB?
There are 10 known substitutes for NAS1397P4CB: 6515873, 47306-9, NPC-4 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1397P4CB?
NAS1397P4CB is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-191-7588. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1397P4CB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026