PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1397P10N
NAS1397P10N ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: NATURAL COLOR, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-465-5585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1397P10N
NSN: 5340-00-465-5585
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresNATURAL COLOR
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
loop_inside_diameter0.625 INCHES NOMINAL IN
specification/standard_data80205-NA1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.860 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.580 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
NSN5340-00-465-5585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1397P10N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.940 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.630 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.620 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DIAMETER: 0.191 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.940 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.630 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.620 INCHES NOMINAL IN
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.191 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
X1-2200-1495075PC63Interchangeable
interchangeable cross-reference
interchangeable
N10BInterchangeable
interchangeable cross-reference
interchangeable
A6852-14Interchangeable
interchangeable cross-reference
interchangeable
10012412Interchangeable
interchangeable cross-reference
interchangeable
5340009525408Interchangeable
interchangeable cross-reference
interchangeable
900128-00Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1397P10N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1397P10N?
NAS1397P10N is a CLAMP,LOOP.
What parts can replace NAS1397P10N?
There are 6 known substitutes for NAS1397P10N: X1-2200-1495075PC63, N10B, A6852-14 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1397P10N?
NAS1397P10N is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-465-5585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1397P10N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026