PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1382-1
NAS1382-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOOP,STRAP FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL, inside_height: 0.780 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-990-3186, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1382-1
NSN: 5340-00-990-3186
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL
inside_height0.780 INCHES NOMINAL IN
special_featuresFABRICATION METHOD: CAST;INSIDE WIDTH: 1.060 IN. NOM.;MOUNTING METHOD: STRAPS;STRAIGHT SIDE FORM: NONROLLER;STRAIGHT SIDE FORM: 0.188 IN. DIA. IN
surface_treatmentCADMIUM AND CHROMATE
NSN5340-00-990-3186
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1382-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE HEIGHT: 0.780 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESFABRICATION METHOD: CAST;INSIDE WIDTH: 1.060 IN. NOM.;MOUNTING METHOD: STRAPS;STRAIGHT SIDE FORM: NONROLLER;STRAIGHT SIDE FORM: 0.188 IN. DIA. IN
INSIDE HEIGHT0.780 INCHES NOMINAL IN
MATERIALSTEEL
SURFACE TREATMENTCADMIUM AND CHROMATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
34025-1Interchangeable
interchangeable cross-reference
interchangeable
33206Interchangeable
interchangeable cross-reference
interchangeable
NAS1382-5Interchangeable
interchangeable cross-reference
interchangeable
NAS1382Interchangeable
interchangeable cross-reference
interchangeable
NAS1382-2Interchangeable
interchangeable cross-reference
interchangeable
34031-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1382-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1382-1?
NAS1382-1 is a LOOP,STRAP FASTENER.
What parts can replace NAS1382-1?
There are 14 known substitutes for NAS1382-1: 34025-1, 33206, NAS1382-5 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1382-1?
NAS1382-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-990-3186. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1382-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026