PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1352C5-48
NAS1352C5-48 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL, head_style: FLAT CHAMFER, head_height: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, thread_length: 2.829 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-142-4872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1352C5-48
NSN: 5305-01-142-4872
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL
head_styleFLAT CHAMFER
head_height0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
thread_length2.829 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
fastener_length2.940 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL C MINIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-01-142-4872
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1352C5-48 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL
•
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH LBS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.312 INCHES IN
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP XM-7 OR STEEL COMP 384 OVERALL
HARDNESS RATING80.0 ROCKWELL C MINIMUM OVERALL
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
SPECIFICATION/STANDARD DATA80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD SERIES DESIGNATORUNRC
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
150-428GPC390Interchangeable
interchangeable cross-reference
interchangeable
389988PC390Interchangeable
interchangeable cross-reference
interchangeable
20-390Interchangeable
interchangeable cross-reference
interchangeable
402961Interchangeable
interchangeable cross-reference
interchangeable
2907353Interchangeable
interchangeable cross-reference
interchangeable
26424Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1352C5-48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1352C5-48?
NAS1352C5-48 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NAS1352C5-48?
There are 13 known substitutes for NAS1352C5-48: 150-428GPC390, 389988PC390, 20-390 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1352C5-48?
NAS1352C5-48 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-142-4872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1352C5-48

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026