PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1352-3-24
NAS1352-3-24 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL UNS K03104 OVERALL, head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-051-8025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1352-3-24
NSN: 5305-01-051-8025
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL UNS K03104 OVERALL
head_styleFLAT CHAMFER
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length0.875 INCHES NOMINAL IN
fastener_length1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-01-051-8025
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1352-3-24 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 24
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH LBS
•
THREAD SERIES DESIGNATOR: UNRC
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH24
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SPECIFICATION/STANDARD DATA80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MINIMUM YIELD STRENGTH155000 POUNDS PER SQUARE INCH LBS
THREAD SERIES DESIGNATORUNRC
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
A-A-51145 TY 1 FORM BInterchangeable
interchangeable cross-reference
interchangeable
0F506Interchangeable
interchangeable cross-reference
interchangeable
A-A-51145DInterchangeable
interchangeable cross-reference
interchangeable
397333Interchangeable
interchangeable cross-reference
interchangeable
364947Interchangeable
interchangeable cross-reference
interchangeable
2595Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1352-3-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1352-3-24?
NAS1352-3-24 is a SCREW,CAP,SOCKET HEAD.
What parts can replace NAS1352-3-24?
There are 26 known substitutes for NAS1352-3-24: A-A-51145 TY 1 FORM B, 0F506, A-A-51145D and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1352-3-24?
NAS1352-3-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-051-8025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1352-3-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026