PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1352-16LE80P
NAS1352-16LE80P ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL FASTENER, head_style: FLAT CHAMFER, head_height: 0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 1.479 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, thread_length: 2.500 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-322-1593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1352-16LE80P
NSN: 5305-01-322-1593
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL FASTENER
head_styleFLAT CHAMFER
head_height0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_class3A A
head_diameter1.479 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
thread_length2.500 INCHES MINIMUM IN
fastener_length4.860 INCHES MINIMUM AND 5.000 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
locking_featurePATCH OR PELLET OR STRIP THREADS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE FASTENER
width_across_flats0.7500 INCHES MINIMUM AND 0.7570 INCHES MAXIMUM IN
NSN5305-01-322-1593
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1352-16LE80P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
•
THREAD SERIES DESIGNATOR: UNRC
•
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
•
WIDTH ACROSS FLATS: 0.7500 INCHES MINIMUM AND 0.7570 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: PLASTIC POLYAMIDE NYLON LOCKING FEATURE
•
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
THREAD SERIES DESIGNATORUNRC
SURFACE TREATMENTCADMIUM AND CHROMATE FASTENER
WIDTH ACROSS FLATS0.7500 INCHES MINIMUM AND 0.7570 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH170000 POUNDS PER SQUARE INCH LBS
MATERIALPLASTIC POLYAMIDE NYLON LOCKING FEATURE
SPECIFICATION/STANDARD DATA80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
MINIMUM YIELD STRENGTH150000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1266Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-296Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-296 TY3SEBInterchangeable
interchangeable cross-reference
interchangeable
31-325Interchangeable
interchangeable cross-reference
interchangeable
108-308-001Interchangeable
interchangeable cross-reference
interchangeable
851018Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1352-16LE80P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1352-16LE80P?
NAS1352-16LE80P is a SCREW,CAP,SOCKET HEAD.
What parts can replace NAS1352-16LE80P?
There are 10 known substitutes for NAS1352-16LE80P: 1266, GGG-D-296, GGG-D-296 TY3SEB and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1352-16LE80P?
NAS1352-16LE80P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-322-1593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1352-16LE80P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026