PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1352-10LE32P
NAS1352-10LE32P ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL FASTENER, head_style: FLAT CHAMFER, head_height: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN, thread_length: 1.750 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-812-8407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1352-10LE32P
NSN: 5305-00-812-8407
FSC: 5305
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL FASTENER
head_styleFLAT CHAMFER
head_height0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
thread_length1.750 INCHES MINIMUM IN
fastener_length1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePATCH OR PELLET OR STRIP THREADS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE FASTENER
width_across_flats0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
NSN5305-00-812-8407
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1352-10LE32P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL FASTENER
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
WIDTH ACROSS FLATS: 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
LOCKING FEATURE: PATCH OR PELLET OR STRIP THREADS
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
THREAD QUANTITY PER INCH: 11
•
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH LBS
•
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
WIDTH ACROSS FLATS0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD QUANTITY PER INCH11
MINIMUM YIELD STRENGTH130000 POUNDS PER SQUARE INCH LBS
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
SPECIFICATION/STANDARD DATA80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
053654Interchangeable
interchangeable cross-reference
interchangeable
31256Interchangeable
interchangeable cross-reference
interchangeable
7891266P4Interchangeable
interchangeable cross-reference
interchangeable
19832Interchangeable
interchangeable cross-reference
interchangeable
15RX8Interchangeable
interchangeable cross-reference
interchangeable
31256-03013Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1352-10LE32P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1352-10LE32P?
NAS1352-10LE32P is a SCREW,CAP,SOCKET HEAD.
What parts can replace NAS1352-10LE32P?
There are 10 known substitutes for NAS1352-10LE32P: 053654, 31256, 7891266P4 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1352-10LE32P?
NAS1352-10LE32P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-812-8407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1352-10LE32P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026