NAS1351C3LN8P — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1351C3LN8P: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-913-4080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1351C3LN8P

NSN: 5305-00-913-4080
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
head_style	FLAT CHAMFER
head_height	0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length	0.500 INCHES MINIMUM IN
fastener_length	0.500 INCHES NOMINAL IN
hardness_rating	80.0 ROCKWELL B MINIMUM OVERALL
special_features	THIS SCREW HAS SAFETY WIRE HOLES IN THE HEAD.
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM OR CHROMATE OVERALL
width_across_flats	0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
NSN	5305-00-913-4080

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.500 INCHES NOMINAL IN

•

THREAD LENGTH: 0.500 INCHES MINIMUM IN

•

HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
HEAD HEIGHT	0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH	0.500 INCHES NOMINAL IN
THREAD LENGTH	0.500 INCHES MINIMUM IN
HARDNESS RATING	80.0 ROCKWELL B MINIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

TN1351C3LN8PReference document

Same NSN cross-reference

Reference document — Secondary reference

NAS1351C3LNH8PSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1351C3LN8P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1351C3LN8P?

NAS1351C3LN8P is a SCREW,CAP,SOCKET HEAD.

What parts can replace NAS1351C3LN8P?

There are 2 known substitutes for NAS1351C3LN8P: TN1351C3LN8P, NAS1351C3LNH8P. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1351C3LN8P?

NAS1351C3LN8P is cataloged in the U.S. Government catalog under NSN 5305-00-913-4080. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1351C3LN8P — SCREW,CAP,SOCKET HEAD

Request a Quote — NAS1351C3LN8P