NAS1351-10H140P — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1351-10H140P: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-306-1622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1351-10H140P

NSN: 5305-01-306-1622
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	STEEL OVERALL
hole_type	DRILLED
head_style	FLAT CHAMFER
head_height	0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
hole_diameter	0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
hole_quantity	6
thread_length	0.734 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
fastener_length	0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
hardness_rating	37.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
NSN	5305-01-306-1622

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 0.734 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN

•

HARDNESS RATING: 37.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL

•

HOLE CONFIGURATION STYLE: ROUND INTERNAL HEXAGON

•

NOMINAL THREAD DIAMETER: 0.625 INCHES IN

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.5000 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM IN
HEAD HEIGHT	0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
FASTENER LENGTH	0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	0.734 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
HARDNESS RATING	37.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLE	ROUND INTERNAL HEXAGON
NOMINAL THREAD DIAMETER	0.625 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 1

FF-S-86Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NAS1351-10H140P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1351-10H140P?

NAS1351-10H140P is a SCREW,CAP,SOCKET HEAD.

What parts can replace NAS1351-10H140P?

There is 1 known substitute for NAS1351-10H140P: FF-S-86. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1351-10H140P?

NAS1351-10H140P is cataloged in the U.S. Government catalog under NSN 5305-01-306-1622. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1351-10H140P — SCREW,CAP,SOCKET HEAD

Request a Quote — NAS1351-10H140P