PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1330C3E-166
NAS1330C3E-166 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, nut_diameter: 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 3B. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-047-0395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1330C3E-166
NSN: 5310-01-047-0395
FSC: 5310
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 430 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
nut_diameter0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class3B
head_diameter0.391 INCHES NOMINAL IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.1900 INCHES IN
NSN5310-01-047-0395
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1330C3E-166 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 430 OVERALL
•
HEAD COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.1900 INCHES IN
•
THREAD QUANTITY PER INCH: 32
•
SHANK END TYPE: OPEN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 430 OVERALL
HEAD COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD SERIESUNF
NOMINAL THREAD SIZE0.1900 INCHES IN
THREAD QUANTITY PER INCH32
SHANK END TYPEOPEN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NUT STYLEBLIND RIVET W/SMOOTH ROUND SHANK
HEAD DIAMETER0.391 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
V13-6Interchangeable
interchangeable cross-reference
interchangeable
PTD6Interchangeable
interchangeable cross-reference
interchangeable
PTE6Interchangeable
interchangeable cross-reference
interchangeable
C1016-6Interchangeable
interchangeable cross-reference
interchangeable
922AZ2Interchangeable
interchangeable cross-reference
interchangeable
TX20FTPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1330C3E-166?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1330C3E-166?
NAS1330C3E-166 is a NUT,PLAIN,BLIND RIVET.
What parts can replace NAS1330C3E-166?
There are 8 known substitutes for NAS1330C3E-166: V13-6, PTD6, PTE6 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1330C3E-166?
NAS1330C3E-166 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-047-0395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1330C3E-166

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026