PartsTable
Technical Data Sheet
Download PDF

NAS1329 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1329: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT, key_length: 0.023 INCHES MAXIMUM IN, nut_length: 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN, head_height: 0.088 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-855-5011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1329
NSN: 5310-00-855-5011
NIINs: 008555011, 010151021, 011672415, 017349474
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT
key_length0.023 INCHES MAXIMUM IN
nut_length0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
head_height0.088 INCHES NOMINAL IN
nut_diameter0.597 INCHES MAXIMUM IN
thread_class3B
head_diameter0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeOPEN
thread_directionRIGHT-HAND
NSN5310-00-855-5011
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1329 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.037 INCHES NOMINAL IN
•
NUT LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
SHANK END TYPE: CLOSED
•
HEAD STYLE: FLAT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.221 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.037 INCHES NOMINAL IN
NUT LENGTH0.625 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
SHANK END TYPECLOSED
HEAD STYLEFLAT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.221 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
NUT STYLEBLIND RIVET W/SMOOTH ROUND SHANK
SUBSTITUTES & CROSS-REFERENCES 3
A08875Reference document
Same NSN cross-reference
Reference document — Secondary reference
5-4-1311-3-39Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS1329A08B75Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1329?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1329?
NAS1329 is a NUT,PLAIN,BLIND RIVET.
What parts can replace NAS1329?
There are 3 known substitutes for NAS1329: A08875, 5-4-1311-3-39, NAS1329A08B75. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1329?
NAS1329 is cataloged in the U.S. Government catalog under NSN 5310-00-855-5011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1329

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.