PartsTable
Technical Data Sheet
NAS12808 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON MALLEABLE CONNECTION END, design_type: FIXED, end_position: CONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END, overall_length: 3.500 INCHES NOMINAL IN, inside_diameter: 0.500 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-817-0803, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS12808
NSN: 5340-00-817-0803
FSC: 5340
CAGE: 96568 — BRADFORD VIBRATORS CO THE (USA)
SPECIFICATIONS
materialIRON MALLEABLE CONNECTION END
design_typeFIXED
end_positionCONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
overall_length3.500 INCHES NOMINAL IN
inside_diameter0.500 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleROUND EYE
hook_style_designatorSLIDING BOLT
rubber_covered_featureNOT INCLUDED
departure_from_cited_designatorTJCB
NSN5340-00-817-0803
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS12808 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
END POSITION: CONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
MATERIAL: IRON MALLEABLE HOOK
DEPARTURE FROM CITED DESIGNATOR: TJCB
UNATTACHED RING: NOT INCLUDED
RUBBER COVERED FEATURE: NOT INCLUDED
HOOK STYLE DESIGNATOR: SLIDING BOLT
DESIGN TYPE: FIXED
TECHNICAL CHARACTERISTICS (FLIS)
END POSITIONCONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
MATERIALIRON MALLEABLE HOOK
MATERIALIRON MALLEABLE CONNECTION END
DEPARTURE FROM CITED DESIGNATORTJCB
UNATTACHED RINGNOT INCLUDED
RUBBER COVERED FEATURENOT INCLUDED
HOOK STYLE DESIGNATORSLIDING BOLT
DESIGN TYPEFIXED
OVERALL LENGTH3.500 INCHES NOMINAL IN
INSIDE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
3400847-11Interchangeable
interchangeable cross-reference
interchangeable
NAS1282C8Interchangeable
interchangeable cross-reference
interchangeable
NAS1282Interchangeable
interchangeable cross-reference
interchangeable
NAS1282C12Interchangeable
interchangeable cross-reference
interchangeable
NAS1282A16Interchangeable
interchangeable cross-reference
interchangeable
NAS1282B12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS12808?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS12808?
NAS12808 is a SNAP HOOK.
What parts can replace NAS12808?
There are 12 known substitutes for NAS12808: 3400847-11, NAS1282C8, NAS1282 and 9 more. Substitute compatibility should be verified for your specific system.
Is NAS12808 still available?
NAS12808 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS12808