PartsTable
Technical Data Sheet
Download PDF

NAS1221-08-8P — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS1221-08-8P: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.294 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.314 INCHES MINIMUM AND 0.364 INCHES MAXIMUM IN, screw_material: STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150, fastener_length: 0.824 INCHES MINIMUM AND 0.854 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-044-0721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1221-08-8P
NSN: 5305-01-044-0721
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.294 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.314 INCHES MINIMUM AND 0.364 INCHES MAXIMUM IN
screw_materialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150
fastener_length0.824 INCHES MINIMUM AND 0.854 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleHIGH-TORQUE
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-01-044-0721
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1221-08-8P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.824 INCHES MINIMUM AND 0.854 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.314 INCHES MINIMUM AND 0.364 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS1221 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.824 INCHES MINIMUM AND 0.854 INCHES MAXIMUM IN
THREAD LENGTH0.314 INCHES MINIMUM AND 0.364 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS1221 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SCREW MATERIALSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy NAS1221-08-8P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1221-08-8P?
NAS1221-08-8P is a SCREW,MACHINE.
What is the NSN for NAS1221-08-8P?
NAS1221-08-8P is cataloged in the U.S. Government catalog under NSN 5305-01-044-0721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1221-08-8P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.