NAS1218R04-3 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1218R04-3: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.272 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN, screw_material: TITANIUM ALLOY.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-190-4563, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1218R04-3

NSN: 5305-01-190-4563
FSC: 5305 — Screws
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

head_style	PAN NO. 2
head_height	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length	0.272 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
screw_material	TITANIUM ALLOY
fastener_length	0.420 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
special_features	INTERNAL DRIVE RIBBED
thread_direction	RIGHT-HAND
internal_drive_style	TORQUE SET
nominal_thread_diameter	0.112 INCHES IN
minimum_tensile_strength	160000 POUNDS PER SQUARE INCH LBS
NSN	5305-01-190-4563

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.420 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS4967,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE V

•

THREAD LENGTH: 0.272 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.112 INCHES IN

•

HEAD STYLE: PAN NO. 2

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: TITANIUM ALLOY

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FASTENER LENGTH	0.420 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	AMS4967,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE V
THREAD LENGTH	0.272 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	PAN NO. 2
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	TITANIUM ALLOY
SPECIAL FEATURES	INTERNAL DRIVE RIBBED
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 3

GB511DU04V-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

HR217V-04-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PBF1355V04-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NAS1218R04-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1218R04-3?

NAS1218R04-3 is a SCREW,MACHINE.

What parts can replace NAS1218R04-3?

There are 3 known substitutes for NAS1218R04-3: GB511DU04V-3, HR217V-04-3, PBF1355V04-3. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1218R04-3?

NAS1218R04-3 is cataloged in the U.S. Government catalog under NSN 5305-01-190-4563. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1218R04-3 — SCREW,MACHINE

Request a Quote — NAS1218R04-3