PartsTable
Technical Data Sheet
Download PDF

NAS1195DD4KL — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1195DD4KL: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN, plate_width: 0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN, plate_thickness: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN, thru-hole_diameter: 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-047-7929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1195DD4KL
NSN: 5310-01-047-7929
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL
nut_stylePLATE NUT SPACER
nut_length0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
plate_width0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
plate_thickness0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
thru-hole_diameter0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
mounting_hole_diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
specification/standard_data80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
mounting_hole_arrangement_style2 HOLES
material_document_and_classificationQQ A 250.3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_aperture_center_to_mounting_hole_center0.278 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
NSN5310-01-047-7929
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1195DD4KL · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
NUT LENGTH: 0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
•
PLATE WIDTH: 0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ A 250.3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
NUT LENGTH0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
PLATE WIDTH0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONQQ A 250.3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.278 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
THRU-HOLE DIAMETER0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NAS1195DD4KL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1195DD4KL?
NAS1195DD4KL is a NUT SPACER,PLATE.
What is the NSN for NAS1195DD4KL?
NAS1195DD4KL is cataloged in the U.S. Government catalog under NSN 5310-01-047-7929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1195DD4KL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.