PartsTable
Technical Data Sheet
Download PDF

NAS1195DD4K4 — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1195DD4K4: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN, plate_width: 0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN, plate_thickness: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, thru-hole_diameter: 0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-151-5490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1195DD4K4
NSN: 5310-00-151-5490
FSC: 5310 — Nuts and Washers
CAGE: 30889 — ERIKS SOUTHWEST INC DBA MONTCLAIR ENTERPRISES (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 OVERALL
nut_stylePLATE NUT SPACER
nut_length0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
plate_width0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
plate_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
thru-hole_diameter0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
mounting_hole_diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
specification/standard_data80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
mounting_hole_arrangement_style2 HOLES
distance_from_aperture_center_to_mounting_hole_center0.278 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
center_to_center_distance_between_mounting_holes_along_width0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
NSN5310-00-151-5490
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1195DD4K4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
NUT LENGTH: 0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
•
PLATE WIDTH: 0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/3,ALLOY 2014,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,ALLOY ALCLAD 2024,T3 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/5,T4 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-250/13,ALLOY ALCLAD 7075,T6 FED SPEC 4TH MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
NUT LENGTH0.576 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
PLATE WIDTH0.399 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/3,ALLOY 2014,T6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/5,ALLOY ALCLAD 2024,T3 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-250/5,T4 FED SPEC 3RD MATERIAL RESPONSE OR QQ-A-250/13,ALLOY ALCLAD 7075,T6 FED SPEC 4TH MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.278 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
THRU-HOLE DIAMETER0.270 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5310PL0715178Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1195DD4K4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1195DD4K4?
NAS1195DD4K4 is a NUT SPACER,PLATE.
What parts can replace NAS1195DD4K4?
There is 1 known substitute for NAS1195DD4K4: 5310PL0715178. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1195DD4K4?
NAS1195DD4K4 is cataloged in the U.S. Government catalog under NSN 5310-00-151-5490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1195DD4K4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.