PartsTable
Technical Data Sheet
Download PDF

NAS1195D4XL — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1195D4XL: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 0.786 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN, plate_width: 0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, plate_thickness: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-133-4489, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1195D4XL
NSN: 5310-01-133-4489
FSC: 5310 — Nuts and Washers
CAGE: 30889 — ERIKS SOUTHWEST INC DBA MONTCLAIR ENTERPRISES (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052 OVERALL
nut_stylePLATE NUT SPACER
nut_length0.786 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
plate_width0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
plate_thickness0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
thru-hole_diameter0.322 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
mounting_hole_diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
specification/standard_data80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
mounting_hole_arrangement_style2 HOLES
material_document_and_classificationQQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-133-4489
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1195D4XL · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
NUT LENGTH: 0.786 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PLATE WIDTH: 0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
NUT LENGTH0.786 INCHES MINIMUM AND 0.801 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
PLATE WIDTH0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.278 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.559 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
10109679Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1195D4XL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1195D4XL?
NAS1195D4XL is a NUT SPACER,PLATE.
What parts can replace NAS1195D4XL?
There is 1 known substitute for NAS1195D4XL: 10109679. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1195D4XL?
NAS1195D4XL is cataloged in the U.S. Government catalog under NSN 5310-01-133-4489. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1195D4XL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.