PartsTable
Technical Data Sheet
Download PDF

NAS1195-08WL — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1195-08WL: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include nut_style: PLATE NUT SPACER, nut_length: 0.677 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN, plate_width: 0.282 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN, plate_thickness: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, thru-hole_diameter: 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-020-4670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1195-08WL
NSN: 5310-01-020-4670
FSC: 5310 — Nuts and Washers
CAGE: 30889 — ERIKS SOUTHWEST INC DBA MONTCLAIR ENTERPRISES (USA)
SPECIFICATIONS
nut_stylePLATE NUT SPACER
nut_length0.677 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
plate_width0.282 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
plate_thickness0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
thru-hole_diameter0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
mounting_hole_diameter0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
specification/standard_data80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
mounting_hole_arrangement_style2 HOLES
material_document_and_classification66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-01-020-4670
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1195-08WL · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
NUT LENGTH: 0.677 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PLATE WIDTH: 0.282 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
NUT LENGTH0.677 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
PLATE WIDTH0.282 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-7952 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA80205-NAS1195 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.231 INCHES MINIMUM AND 0.237 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.466 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy NAS1195-08WL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1195-08WL?
NAS1195-08WL is a NUT SPACER,PLATE.
What is the NSN for NAS1195-08WL?
NAS1195-08WL is cataloged in the U.S. Government catalog under NSN 5310-01-020-4670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1195-08WL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.