NAS1193K12-1: WASHER,KEY.
The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, hole_diameter: 0.755 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN, hardness_rating: 44.0 ROCKWELL C MAXIMUM, outside_diameter: 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN, special_features: TWO PROJECTIONS 180.0 DEG APART ON ONE BEARING SURFACE; FACE OPPOSITE PROJECTIONS SERRATED, style_designator: INTERNAL PREBENT KEY. This part is cataloged in the U.S.
Government catalog under NSN 5310-00-945-0582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 630 OVERALL |
| hole_diameter | 0.755 INCHES MINIMUM AND 0.771 INCHES MAXIMUM IN |
| hardness_rating | 44.0 ROCKWELL C MAXIMUM |
| outside_diameter | 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM IN |
| special_features | TWO PROJECTIONS 180.0 DEG APART ON ONE BEARING SURFACE; FACE OPPOSITE PROJECTIONS SERRATED |
| style_designator | INTERNAL PREBENT KEY |
| surface_treatment | CADMIUM AND CHROMATE OVERALL |
| material_thickness | 0.062 INCHES NOMINAL IN |
| wire_hole_diameter | 0.071 INCHES NOMINAL IN |
| specification/standard_data | 80205-NAS 1193 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| material_document_and_classification | AMS 5350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| distance_from_key_center_to_wire_hole_center | 0.454 INCHES NOMINAL IN |
| NSN | 5310-00-945-0582 |
| WIRE HOLE DIAMETER | 0.062 INCHES NOMINAL IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| DISTANCE FROM KEY CENTER TO WIRE HOLE CENTER | 0.469 INCHES NOMINAL IN |
| STYLE DESIGNATOR | INTERNAL PREBENT KEY |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| OUTSIDE DIAMETER | 1.125 INCHES NOMINAL IN |
| MATERIAL THICKNESS | 0.062 INCHES NOMINAL IN |
| SPECIFICATION/STANDARD DATA | 80205-NAS1193 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SPECIAL FEATURES | NO INTERNAL KEY;2 PROJECTIONS EQUALLY SPACED ON WASHER FACE,0.094 IN. WIDE BY 0.031 IN. HIGH;64 EQUALLY SPACED SERRATIONS ON FACE OPPOSITE PROJECTIONS IN |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |