NAS1189E3P10 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1189E3P10: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.452 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN, surface_finish: 32.0 MICROINCHES THREADS. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-038-4757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1189E3P10

NSN: 5305-01-038-4757
NIINs: 010384757, 010828235
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	IRON ALLOY 660 OVERALL
head_style	FLAT COUNTERSUNK
thread_class	3A A
head_diameter	0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length	0.452 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN
surface_finish	32.0 MICROINCHES THREADS
fastener_length	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
locking_feature	PATCH THREADS
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE OVERALL
internal_drive_style	CROSS RECESS TYPE 1
NSN	5305-01-038-4757

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES THREADS

•

FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 0.452 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	0.452 INCHES MINIMUM AND 0.545 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

SUBSTITUTES & CROSS-REFERENCES 2

NAS1189E3P10BSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NAS1741C3R10UReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1189E3P10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1189E3P10?

NAS1189E3P10 is a SCREW,CAP,SOCKET HEAD.

What parts can replace NAS1189E3P10?

There are 2 known substitutes for NAS1189E3P10: NAS1189E3P10B, NAS1741C3R10U. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1189E3P10?

NAS1189E3P10 is cataloged in the U.S. Government catalog under NSN 5305-01-038-4757. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1189E3P10 — SCREW,CAP,SOCKET HEAD

Request a Quote — NAS1189E3P10