PartsTable
Technical Data Sheet
Download PDF

NAS1169DD6 — WASHER,FINISHING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1169DD6: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, recess_angle: 99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM, hole_diameter: 0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, overall_height: 0.082 INCHES NOMINAL IN, recess_diameter: 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN, outside_diameter: 0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-102-3300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1169DD6
NSN: 5310-01-102-3300
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
recess_angle99.0 DEGREES MINIMUM AND 103.0 DEGREES MAXIMUM
hole_diameter0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
overall_height0.082 INCHES NOMINAL IN
recess_diameter0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
outside_diameter0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
style_designatorFINISHING
surface_treatmentANODIZE OVERALL
material_thickness0.025 INCHES NOMINAL IN
specification/standard_data80205-NAS1169 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationQQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-102-3300
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1169DD6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: FINISHING
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1169 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
RECESS DIAMETER: 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.082 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORFINISHING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80205-NAS1169 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
RECESS DIAMETER0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
Z101302Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1169DD6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1169DD6?
NAS1169DD6 is a WASHER,FINISHING.
What parts can replace NAS1169DD6?
There is 1 known substitute for NAS1169DD6: Z101302. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1169DD6?
NAS1169DD6 is cataloged in the U.S. Government catalog under NSN 5310-01-102-3300. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1169DD6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.