PartsTable
Technical Data Sheet
Download PDF

NAS1164-5L — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

NAS1164-5L: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 FASTENER, head_style: FLAT COUNTERSUNK, grip_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-902-4715, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1164-5L
NSN: 5305-00-902-4715
FSC: 5305 — Screws
CAGE: 50568 — APCOM INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 FASTENER
head_styleFLAT COUNTERSUNK
grip_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
locking_featureSTRIP THREADS
thread_directionRIGHT-HAND
NSN5305-00-902-4715
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: NAS1164-5L · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
FASTENER LENGTH: 0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
•
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD LENGTH0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
NAS116405LReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1164-5L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1164-5L?
NAS1164-5L is a SCREW,CLOSE TOLERANCE.
What parts can replace NAS1164-5L?
There is 1 known substitute for NAS1164-5L: NAS116405L. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1164-5L?
NAS1164-5L is cataloged in the U.S. Government catalog under NSN 5305-00-902-4715. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1164-5L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.