NAS1160C6 — WASHER,FINISHING

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

NAS1160C6: WASHER,FINISHING.

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include recess_angle: 100.0 DEGREES NOMINAL, hole_diameter: 0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, overall_height: 0.082 INCHES NOMINAL IN, recess_diameter: 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN, outside_diameter: 0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN, style_designator: FINISHING. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-080-9223, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1160C6

NSN: 5310-01-080-9223
FSC: 5310 — Nuts and Washers
CAGE: 04348 — LAWRENCE ENGINEERING AND SUPPLY INC (USA)

SPECIFICATIONS

recess_angle	100.0 DEGREES NOMINAL
hole_diameter	0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
overall_height	0.082 INCHES NOMINAL IN
recess_diameter	0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
outside_diameter	0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
style_designator	FINISHING
surface_treatment	PASSIVATE OVERALL
material_thickness	0.025 INCHES NOMINAL IN
specification/standard_data	80205-NAS1169 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
surface_treatment_document_and_classification	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN	5310-01-080-9223

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

STYLE DESIGNATOR: FINISHING

•

OUTSIDE DIAMETER: 0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN

•

SPECIFICATION/STANDARD DATA: 80205-NAS1169 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

RECESS DIAMETER: 0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN

•

SURFACE TREATMENT: PASSIVATE OVERALL

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.082 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATOR	FINISHING
OUTSIDE DIAMETER	0.470 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.025 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA	80205-NAS1169 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
RECESS DIAMETER	0.279 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
SURFACE TREATMENT	PASSIVATE OVERALL
HOLE DIAMETER	0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
RECESS ANGLE	100.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

NAS1169C6Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1160C6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1160C6?

NAS1160C6 is a WASHER,FINISHING.

What parts can replace NAS1160C6?

There is 1 known substitute for NAS1160C6: NAS1169C6. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1160C6?

NAS1160C6 is cataloged in the U.S. Government catalog under NSN 5310-01-080-9223. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1160C6 — WASHER,FINISHING

Request a Quote — NAS1160C6