PartsTable
Technical Data Sheet
Download PDF

NAS1149C0663R — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

NAS1149C0663R: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OVERALL, thickness: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, hole_diameter: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, overall_diameter: 0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-167-0804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1149C0663R
NSN: 5310-00-167-0804
NIINs: 001670804, 014973983, 016677758
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OVERALL
thickness0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
hole_diameter0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
overall_diameter0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationKC-130J ACFT ENGINE; MODEL AE2100D3
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 2 GRADE AND B CLASS
criticality_code_justificationAGAV
material_document_and_classificationMIL-S-5059 1/4 HARD (125 KSI) MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5310-00-167-0804
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: NAS1149C0663R · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 GRADE AND B CLASS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
SURFACE TREATMENTPASSIVATE OVERALL
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
5310001670804Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN960C616Reference document
Same NSN cross-reference
Reference document — Secondary reference
416631-9Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
004-003081-038Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-W-92Reference document
Same NSN cross-reference
Reference document — Identification reference
006-0007-33Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy NAS1149C0663R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1149C0663R?
NAS1149C0663R is a WASHER,FLAT.
What parts can replace NAS1149C0663R?
There are 8 known substitutes for NAS1149C0663R: 5310001670804, AN960C616, 416631-9 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1149C0663R?
NAS1149C0663R is cataloged in the U.S. Government catalog under NSN 5310-00-167-0804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1149C0663R

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.