NAS1102-4-5 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1102-4-5: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, fastener_length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-549-6971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1102-4-5

NSN: 5305-00-549-6971
NIINs: 005496971, 008083282
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
thread_class	3A A
head_diameter	0.177 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length	0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_material	STEEL COMP E4340 OR STEEL COMP 2340 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 6150 OR STEEL COMP 4140 OR STEEL COMP 4037
fastener_length	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
hardness_rating	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_style	TORQUE SET
nominal_thread_diameter	0.112 INCHES IN
screw_surface_treatment	CADMIUM AND CHROMATE
NSN	5305-00-549-6971

COMPONENT DIAGRAM

KEY FEATURES

•

SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE

•

FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE

•

THREAD LENGTH: 0.104 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN

•

HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM

•

NOMINAL THREAD DIAMETER: 0.250 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

SCREW SURFACE TREATMENT	CADMIUM AND CHROMATE
FASTENER LENGTH	0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE
THREAD LENGTH	0.104 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER	0.250 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1102 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SCREW MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1102-4-5?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1102-4-5?

NAS1102-4-5 is a SCREW,MACHINE.

What is the NSN for NAS1102-4-5?

NAS1102-4-5 is cataloged in the U.S. Government catalog under NSN 5305-00-549-6971. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1102-4-5 — SCREW,MACHINE

Request a Quote — NAS1102-4-5