NAS1101E04-10 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1101E04-10: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.544 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: IRON ALLOY 660. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-159-5545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1101E04-10

NSN: 5305-00-159-5545
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

head_style	FLAT CHAMFER
head_height	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length	0.544 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_material	IRON ALLOY 660
fastener_length	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	TORQUE SET
nominal_thread_diameter	0.112 INCHES IN
screw_surface_treatment	PASSIVATE
minimum_tensile_strength	160000 POUNDS PER SQUARE INCH LBS
NSN	5305-00-159-5545

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: PASSIVATE

•

FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.544 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.112 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.544 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1101 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SCREW MATERIAL	IRON ALLOY 660

SUBSTITUTES & CROSS-REFERENCES 1

NAS1101C04-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy NAS1101E04-10?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1101E04-10?

NAS1101E04-10 is a SCREW,MACHINE.

What parts can replace NAS1101E04-10?

There is 1 known substitute for NAS1101E04-10: NAS1101C04-10. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1101E04-10?

NAS1101E04-10 is cataloged in the U.S. Government catalog under NSN 5305-00-159-5545. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1101E04-10 — SCREW,MACHINE

Request a Quote — NAS1101E04-10