NAS1100E02-7 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

NAS1100E02-7: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, screw_material: IRON ALLOY 660. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-324-6842, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NAS1100E02-7

NSN: 5305-00-324-6842
FSC: 5305 — Screws
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

head_style	PAN
head_height	0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length	0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
screw_material	IRON ALLOY 660
fastener_length	0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	TORQUE SET
nominal_thread_diameter	0.086 INCHES IN
screw_surface_treatment	PASSIVATE
minimum_tensile_strength	160000 POUNDS PER SQUARE INCH LBS
NSN	5305-00-324-6842

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: PASSIVATE

•

FASTENER LENGTH: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.086 INCHES IN

•

HEAD STYLE: PAN

•

THREAD DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 80205-NAS1100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
THREAD LENGTH	0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.086 INCHES IN
HEAD STYLE	PAN
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SCREW MATERIAL	IRON ALLOY 660
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 1

NAS1101E02-7Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NAS1100E02-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NAS1100E02-7?

NAS1100E02-7 is a SCREW,MACHINE.

What parts can replace NAS1100E02-7?

There is 1 known substitute for NAS1100E02-7: NAS1101E02-7. Substitute compatibility should be verified for your specific system.

What is the NSN for NAS1100E02-7?

NAS1100E02-7 is cataloged in the U.S. Government catalog under NSN 5305-00-324-6842. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NAS1100E02-7 — SCREW,MACHINE

Request a Quote — NAS1100E02-7