PartsTable
Technical Data Sheet
PartsTable / O-RING / NAS 1612-12
NAS 1612-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 88.0 SHORE DUROMETER D NOMINAL, special_features: WHITE STRIPE AND WHITE DOT, center_hole_diameter: 0.924 INCHES NOMINAL IN, cross-sectional_height: 0.116 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-394-9850, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS 1612-12
NSN: 5331-00-394-9850
FSC: 5331 — O-RING
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating88.0 SHORE DUROMETER D NOMINAL
special_featuresWHITE STRIPE AND WHITE DOT
center_hole_diameter0.924 INCHES NOMINAL IN
cross-sectional_height0.116 INCHES NOMINAL IN
criticality_code_justificationZZZY
material_document_and_classificationNAS 1613 ASSN STD SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
NSN5331-00-394-9850
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS 1612-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.924 INCHES NOMINAL IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
CROSS-SECTIONAL HEIGHT: 0.116 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.924 INCHES NOMINAL IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
CROSS-SECTIONAL HEIGHT0.116 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
5-131-04-024-00Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5510Interchangeable
interchangeable cross-reference
interchangeable
0921206-9Interchangeable
interchangeable cross-reference
interchangeable
109991Interchangeable
interchangeable cross-reference
interchangeable
3-912-E688-70Interchangeable
interchangeable cross-reference
interchangeable
906-12-9077Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS 1612-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS 1612-12?
NAS 1612-12 is a O-RING.
What parts can replace NAS 1612-12?
There are 23 known substitutes for NAS 1612-12: 5-131-04-024-00, AMS-P-5510, 0921206-9 and 20 more. Substitute compatibility should be verified for your specific system.
Is NAS 1612-12 still available?
NAS 1612-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS 1612-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026