PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAF48379-3
NAF48379-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BASE,STAND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, surface_treatment: ANODIZE, supporting_object/surface_attachment_method: TWO 0.152 IN. DIA MOUNTING HOLES SPACED 1.187 IN.

DIA CENTER TO CENTER IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-544-7724, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAF48379-3
NSN: 5340-00-544-7724
FSC: 5340
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
surface_treatmentANODIZE
supporting_object/surface_attachment_methodTWO 0.152 IN. DIA MOUNTING HOLES SPACED 1.187 IN. DIA CENTER TO CENTER IN
NSN5340-00-544-7724
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAF48379-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY
•
SURFACE TREATMENT: ANODIZE
•
SUPPORTING OBJECT/SURFACE ATTACHMENT METHOD: TWO 0.152 IN. DIA MOUNTING HOLES SPACED 1.187 IN. DIA CENTER TO CENTER IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY
SURFACE TREATMENTANODIZE
SUPPORTING OBJECT/SURFACE ATTACHMENT METHODTWO 0.152 IN. DIA MOUNTING HOLES SPACED 1.187 IN. DIA CENTER TO CENTER IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1028-4Upgraded Successor
successor cross-reference
successor
6220009369414Upgraded Successor
successor cross-reference
successor
02-801741-4Interchangeable
interchangeable cross-reference
interchangeable
559Interchangeable
interchangeable cross-reference
interchangeable
B1004Interchangeable
interchangeable cross-reference
interchangeable
SCD10284Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAF48379-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAF48379-3?
NAF48379-3 is a BASE,STAND.
What parts can replace NAF48379-3?
There are 14 known substitutes for NAF48379-3: 1028-4, 6220009369414, 02-801741-4 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NAF48379-3?
NAF48379-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-544-7724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAF48379-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026