PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NA484-20024
NA484-20024 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 2.1250 INCHES NOMINAL IN, bore_diameter: 2.7559 INCHES NOMINAL IN, overall_width: 2.5626 INCHES NOMINAL IN, standout_width: 0.2188 INCHES NOMINAL IN, special_features: OPERATING TEMPERATURE NORT TO EXCEED 121 DEG C/250 DEG F; OIL HOLE AND GROOVE IN CUP DEGC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-1612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NA484-20024
NSN: 3110-00-120-1612
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width2.1250 INCHES NOMINAL IN
bore_diameter2.7559 INCHES NOMINAL IN
overall_width2.5626 INCHES NOMINAL IN
standout_width0.2188 INCHES NOMINAL IN
special_featuresOPERATING TEMPERATURE NORT TO EXCEED 121 DEG C/250 DEG F; OIL HOLE AND GROOVE IN CUP DEGC
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, NON-ADJUSTABLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
overall_outside_diameter4.7244 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-120-1612
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: NA484-20024 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.7559 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDOUT WIDTH: 0.2188 INCHES NOMINAL IN
•
CUP WIDTH: 2.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, DOUBLE CUP, SINGLE CONES, NON-ADJUSTABLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.7559 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDOUT WIDTH0.2188 INCHES NOMINAL IN
OVERALL WIDTH2.5626 INCHES NOMINAL IN
CUP WIDTH2.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, NON-ADJUSTABLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESOPERATING TEMPERATURE NORT TO EXCEED 121 DEG C/250 DEG F; OIL HOLE AND GROOVE IN CUP DEGC
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
NA569-563DInterchangeable
interchangeable cross-reference
interchangeable
A-A-59656Interchangeable
interchangeable cross-reference
interchangeable
68C01086Interchangeable
interchangeable cross-reference
interchangeable
K60-199AInterchangeable
interchangeable cross-reference
interchangeable
K60-199Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NA484-20024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NA484-20024?
NA484-20024 is a BEARING,ROLLER,TAPERED.
What parts can replace NA484-20024?
There are 20 known substitutes for NA484-20024: NA569-563D, A-A-59656, 68C01086 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NA484-20024?
NA484-20024 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-1612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NA484-20024

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026