PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NA19-25E-43
NA19-25E-43 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES FIRST END, temp_rating: -60.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: BLACK, connection_type: THREADED EXTERNAL PIPE SECOND END, inside_diameter: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-318-0974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NA19-25E-43
NSN: 4720-00-318-0974
FSC: 4720
CAGE: 16128 — GICHNER SYSTEMS GROUP INC GICHNER MOBILIZER DIV (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES FIRST END
temp_rating-60.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorBLACK
connection_typeTHREADED EXTERNAL PIPE SECOND END
inside_diameter0.375 INCHES NOMINAL IN
connection_stylePLAIN SECOND END
outside_diameter0.750 INCHES NOMINAL IN
special_featuresFURNISHED W/ONE ADPTER ST IPE TO TUBE EXT THDS .250-18 NPTF,0.750-20 UNEF
thread_directionRIGHT-HAND FIRST END
burst_test_pressure900.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.250 INCHES SECOND END IN
NSN4720-00-318-0974
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: NA19-25E-43 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OZONE RESISTANT
•
THREAD SERIES DESIGNATOR: UNEF FIRST END
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
•
BURST TEST PRESSURE: 900.0 POUNDS PER SQUARE INCH LBS
•
END CONNECTION DESIGN: STRAIGHT SECOND END
•
NOMINAL THREAD SIZE: 0.250 INCHES SECOND END IN
•
CONNECTION STYLE: SWIVEL NUT, INVERTED FLARE FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OZONE RESISTANT
THREAD SERIES DESIGNATORUNEF FIRST END
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
BURST TEST PRESSURE900.0 POUNDS PER SQUARE INCH LBS
END CONNECTION DESIGNSTRAIGHT SECOND END
NOMINAL THREAD SIZE0.250 INCHES SECOND END IN
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
CONNECTION STYLESWIVEL NUT, INVERTED FLARE FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
MEDIA FOR WHICH DESIGNEDAIR SINGLE RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
MIL-H-3992Interchangeable
interchangeable cross-reference
interchangeable
29862-HBInterchangeable
interchangeable cross-reference
interchangeable
228552Interchangeable
interchangeable cross-reference
interchangeable
228534Interchangeable
interchangeable cross-reference
interchangeable
FG1810EGE173Interchangeable
interchangeable cross-reference
interchangeable
228532Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NA19-25E-43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NA19-25E-43?
NA19-25E-43 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace NA19-25E-43?
There are 27 known substitutes for NA19-25E-43: MIL-H-3992, 29862-HB, 228552 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NA19-25E-43?
NA19-25E-43 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-318-0974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NA19-25E-43

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026