NA150 2-210 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

NA150 2-210: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN, elongation_percentage: 510 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-444-7918, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

NA150 2-210

NSN: 5331-00-444-7918
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER
temp_rating	-25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	60.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
elongation_percentage	510 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
criticality_code_justification	ZZZY
reference_number_differentiating_characteristics	CERTIFIED FREE FROM MERCURY CONTAMINATION
NSN	5331-00-444-7918

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL

•

CRITICALITY CODE JUSTIFICATION: ZZZY

•

ELONGATION PERCENTAGE: 510 MAXIMUM

•

CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN

•

MATERIAL: RUBBER

•

REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CERTIFIED FREE FROM MERCURY CONTAMINATION

TECHNICAL CHARACTERISTICS

TEMP RATING	-25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING	60.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION	ZZZY
ELONGATION PERCENTAGE	510 MAXIMUM
CENTER HOLE DIAMETER	0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
MATERIAL	RUBBER
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	CERTIFIED FREE FROM MERCURY CONTAMINATION

SUBSTITUTES & CROSS-REFERENCES 4

210Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

210-8306Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

N0525-60Reference document

Same NSN cross-reference

Reference document — Secondary reference

N0525 2-210Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy NA150 2-210?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is NA150 2-210?

NA150 2-210 is a O-RING.

What parts can replace NA150 2-210?

There are 4 known substitutes for NA150 2-210: 210, 210-8306, N0525-60 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for NA150 2-210?

NA150 2-210 is cataloged in the U.S. Government catalog under NSN 5331-00-444-7918. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

NA150 2-210 — O-RING

Request a Quote — NA150 2-210