PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N97P13022
N97P13022 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 1.251 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING OR STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-221-6116, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N97P13022
NSN: 5305-00-221-6116
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_stylePAN
head_height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length1.251 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING OR STEEL
fastener_length1.313 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-221-6116
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: N97P13022 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
•
SCREW MATERIAL: STEEL CORROSION RESISTING OR STEEL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.138 INCHES IN
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 9C STYLE
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
SCREW MATERIALSTEEL CORROSION RESISTING OR STEEL
THREAD LENGTH1.251 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
HEAD STYLEPAN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
10125061Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE3STYLE1SInterchangeable
interchangeable cross-reference
interchangeable
AN520B10RInterchangeable
interchangeable cross-reference
interchangeable
AN520B10R9Interchangeable
interchangeable cross-reference
interchangeable
AN515C416R22Interchangeable
interchangeable cross-reference
interchangeable
7928693-219Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy N97P13022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N97P13022?
N97P13022 is a SCREW,MACHINE.
What parts can replace N97P13022?
There are 15 known substitutes for N97P13022: 10125061, FFS92TYPE3STYLE1S, AN520B10R and 12 more. Substitute compatibility should be verified for your specific system.
Is N97P13022 still available?
N97P13022 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N97P13022

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026