PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N9530PC74
N9530PC74 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OD OF FLANGED WASHER TAPERED,SLEEVE ON ID, bore_smallest_diameter: 0.2500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8330, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N9530PC74
NSN: 3110-00-151-8330
FSC: 3110
CAGE: 51228 — ECOLAIRE INC BALDWIN-HAMILTON CO DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOD OF FLANGED WASHER TAPERED,SLEEVE ON ID
bore_smallest_diameter0.2500 INCHES NOMINAL IN
overall_outside_diameter1.1250 INCHES NOMINAL IN
thrust_directional_capability_designationSINGLE
NSN3110-00-151-8330
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: N9530PC74 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
BORE SMALLEST DIAMETER: 0.2500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SPECIAL FEATURESOD OF FLANGED WASHER TAPERED,SLEEVE ON ID
SURFACE FINISHGROUND
BORE SMALLEST DIAMETER0.2500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
OVERALL WIDTH0.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
175-5-1Interchangeable
interchangeable cross-reference
interchangeable
266686Interchangeable
interchangeable cross-reference
interchangeable
N280PC74Interchangeable
Same NIIN cross-reference
interchangeable
74FSN17-1DInterchangeable
Same NIIN cross-reference
interchangeable
N8073PCC456Interchangeable
Same NIIN cross-reference
interchangeable
N30123PC55Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy N9530PC74?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N9530PC74?
N9530PC74 is a BEARING,BALL,THRUST.
What parts can replace N9530PC74?
There are 11 known substitutes for N9530PC74: 175-5-1, 266686, N280PC74 and 8 more. Substitute compatibility should be verified for your specific system.
Is N9530PC74 still available?
N9530PC74 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N9530PC74

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026