PartsTable
Technical Data Sheet
Download PDF

N9163 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N9163: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.094 INCHES NOMINAL IN, diameter: 0.109 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.047 INCHES NOMINAL IN, hardness_rating: 28.0 ROCKWELL C MINIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-276-7690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N9163
NSN: 5315-00-276-7690
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
height0.094 INCHES NOMINAL IN
diameter0.109 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.047 INCHES NOMINAL IN
hardness_rating28.0 ROCKWELL C MINIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle30.0 DEGREES NOMINAL
pin_head_diameter0.312 INCHES NOMINAL IN
under_head_length0.844 INCHES NOMINAL IN
NSN5315-00-276-7690
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N9163 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.047 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.844 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 30.0 DEGREES NOMINAL
•
HARDNESS RATING: 28.0 ROCKWELL C MINIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.312 INCHES NOMINAL IN
•
DIAMETER: 0.109 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.047 INCHES NOMINAL IN
UNDER HEAD LENGTH0.844 INCHES NOMINAL IN
PIN CHAMFER ANGLE30.0 DEGREES NOMINAL
HARDNESS RATING28.0 ROCKWELL C MINIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.312 INCHES NOMINAL IN
DIAMETER0.109 INCHES NOMINAL IN
HEAD STYLEFLAT
HEIGHT0.094 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
MIL-S-24093A CLASS G TYPE IVReference document
Same NSN cross-reference
Reference document — Secondary reference
AS11-S41-0245 PC-23Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N9163?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N9163?
N9163 is a PIN,STRAIGHT,HEADED.
What parts can replace N9163?
There are 2 known substitutes for N9163: MIL-S-24093A CLASS G TYPE IV, AS11-S41-0245 PC-23. Substitute compatibility should be verified for your specific system.
What is the NSN for N9163?
N9163 is cataloged in the U.S. Government catalog under NSN 5315-00-276-7690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N9163

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.