PartsTable
Technical Data Sheet
Download PDF

N9062 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N9062: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLID, overall_length: 50.938 INCHES NOMINAL IN, special_features: TWO OUTER BOLT HOLE CENTERS LOCATED 0.438 IN. FROM CENTER OF SEAL IN, style_designator: STRIP, attachment_method: ROUND HOLE.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-192-9344, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N9062
NSN: 5330-01-192-9344
NIINs: 011929344, 012321363
FSC: 5330 — Packing and Gasket Materials
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSOLID
overall_length50.938 INCHES NOMINAL IN
special_featuresTWO OUTER BOLT HOLE CENTERS LOCATED 0.438 IN. FROM CENTER OF SEAL IN
style_designatorSTRIP
attachment_methodROUND HOLE
fabrication_methodCELLULAR, UNEXPLODED
cross-sectional_width0.500 INCHES NOMINAL IN
cross-sectional_height3.000 INCHES NOMINAL IN
attachment_hole_diameter1.625 INCHES NOMINAL IN
attachment_feature_quantity3
cross-sectional_shape_styleRECTANGULAR
NSN5330-01-192-9344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N9062 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 1.625 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 3
•
CROSS-SECTIONAL HEIGHT: 3.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH: 23.594 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER1.625 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY3
CROSS-SECTIONAL HEIGHT3.000 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
OVERALL LENGTH50.938 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH23.594 INCHES NOMINAL IN
SPECIAL FEATURESTWO OUTER BOLT HOLE CENTERS LOCATED 0.438 IN. FROM CENTER OF SEAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
N6460Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy N9062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N9062?
N9062 is a SEAL,NONMETALLIC STRIP.
What parts can replace N9062?
There is 1 known substitute for N9062: N6460. Substitute compatibility should be verified for your specific system.
What is the NSN for N9062?
N9062 is cataloged in the U.S. Government catalog under NSN 5330-01-192-9344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N9062

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.