N8B — CLAMP,LOOP
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
N8B: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.250 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 0.500 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 0.750 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.562 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-107-1008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
N8B
NSN: 5340-00-107-1008 FSC: 5340 — Hardware, CommercialCAGE: 06915 — RICHCO INC (USA)
SPECIFICATIONS
diameter 0.250 INCHES NOMINAL IN overall_width 0.500 INCHES NOMINAL IN material_thickness 0.062 INCHES NOMINAL IN loop_inside_diameter 0.500 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.750 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.562 INCHES NOMINAL IN NSN 5340-00-107-1008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: N8B
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• DIAMETER: 0.250 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.750 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.562 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER 0.250 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL THICKNESS 0.062 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.750 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.562 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
SUBSTITUTES & CROSS-REFERENCES 1
0001616 Same NSN cross-reference Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN status Active · U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM) No demilitarization required
Ready to buy N8B?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N8B?
N8B is a CLAMP,LOOP.
What parts can replace N8B?
There is 1 known substitute for N8B: 0001616. Substitute compatibility should be verified for your specific system.
What is the NSN for N8B?
N8B is cataloged in the U.S. Government catalog under NSN 5340-00-107-1008. This indicates validated use in U.S. government and defense supply chains.