PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N830SH1PC770XCLN
N830SH1PC770XCLN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 0.368 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN, center_hole_diameter: 0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-027-3590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N830SH1PC770XCLN
NSN: 5330-00-027-3590
FSC: 5330
CAGE: 26505 — GROVE VALVE OPERATIONS (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
peripheral_diameter0.368 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
center_hole_diameter0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
end_item_identificationCRITICAL SAFETY ITEM
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-027-3590
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N830SH1PC770XCLN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 0.368 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER0.368 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONCRITICAL SAFETY ITEM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
219130131Interchangeable
interchangeable cross-reference
interchangeable
02191-3013-01Interchangeable
interchangeable cross-reference
interchangeable
MS28774-10Interchangeable
interchangeable cross-reference
interchangeable
F3C10089PC21Interchangeable
interchangeable cross-reference
interchangeable
V3D10119 ITEM 34Interchangeable
interchangeable cross-reference
interchangeable
MS28774-012CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N830SH1PC770XCLN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N830SH1PC770XCLN?
N830SH1PC770XCLN is a RETAINER,PACKING.
What parts can replace N830SH1PC770XCLN?
There are 16 known substitutes for N830SH1PC770XCLN: 219130131, 02191-3013-01, MS28774-10 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N830SH1PC770XCLN?
N830SH1PC770XCLN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-027-3590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N830SH1PC770XCLN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026