PartsTable
Technical Data Sheet
PartsTable / COMPONENT / N772PC9
N772PC9 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 1.718 INCHES NOMINAL IN, pin_overall_diameter: 0.2500 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL, first_end_taper_length: 0.0312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-494-5103, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N772PC9
NSN: 5315-00-494-5103
FSC: 5315
CAGE: 26505 — GROVE VALVE OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length1.718 INCHES NOMINAL IN
pin_overall_diameter0.2500 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.0312 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-494-5103
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N772PC9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.2500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 1.718 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST END TAPER LENGTH: 0.0312 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.2500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH1.718 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END TAPER LENGTH0.0312 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
G306SFQ5A7Interchangeable
interchangeable cross-reference
interchangeable
6306ZNBRJInterchangeable
interchangeable cross-reference
interchangeable
7306GSInterchangeable
interchangeable cross-reference
interchangeable
3584Interchangeable
interchangeable cross-reference
interchangeable
WC26181Interchangeable
interchangeable cross-reference
interchangeable
260551C91Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy N772PC9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N772PC9?
N772PC9 is a PIN,STRAIGHT,HEADLESS.
What parts can replace N772PC9?
There are 21 known substitutes for N772PC9: G306SFQ5A7, 6306ZNBRJ, 7306GS and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for N772PC9?
N772PC9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-494-5103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N772PC9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026