The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, overall_width: 0.320 INCHES MAXIMUM IN, overall_height: 0.400 INCHES MAXIMUM IN, overall_length: 0.840 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-428-7809, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| body_height | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN |
| body_length | 0.840 INCHES MAXIMUM IN |
| overall_width | 0.320 INCHES MAXIMUM IN |
| overall_height | 0.400 INCHES MAXIMUM IN |
| overall_length | 0.840 INCHES MAXIMUM IN |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND W/DECODED OUTPUT |
| output_logic_form | TRANSISTOR-TRANSISTOR LOGIC |
| inclosure_material | CERAMIC AND GLASS |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | 4 INPUT |
| NSN | 5962-00-428-7809 |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| OVERALL LENGTH | 0.840 INCHES MAXIMUM IN |
| TIME RATING PER CHACTERISTIC | 5.00 NANOSECONDS MINIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 46.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 5.00 NANOSECONDS MINIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT AND 46.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT NS |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| DESIGN FUNCTION AND QUANTITY | 1 DECODER, BINARY CODED DECIMAL TO ONE OF TEN AND 1 DECODER, FOUR TO TEN LINE |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-M-38510/10 GOVERNMENT SPECIFICATION |