PartsTable
Technical Data Sheet
Download PDF

N5798 PC 22 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

N5798 PC 22: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, nut_style: ROUND, nut_diameter: 3.125 INCHES NOMINAL IN, thread_class: 3B, nut_thickness: 0.750 INCHES NOMINAL IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-475-5406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N5798 PC 22
NSN: 5310-01-475-5406
FSC: 5310 — Nuts and Washers
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
nut_styleROUND
nut_diameter3.125 INCHES NOMINAL IN
thread_class3B
nut_thickness0.750 INCHES NOMINAL IN
thread_seriesUN
hardness_rating26.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
thread_directionLEFT-HAND
nominal_thread_size2.125 INCHES IN
end_item_identificationSUB ATMOSPHERE CONTROL
thread_quantity_per_inch12
material_document_and_classificationAISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-475-5406
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: N5798 PC 22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 2.125 INCHES IN
•
NUT DIAMETER: 3.125 INCHES NOMINAL IN
•
NUT THICKNESS: 0.750 INCHES NOMINAL IN
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 416 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE2.125 INCHES IN
NUT DIAMETER3.125 INCHES NOMINAL IN
NUT THICKNESS0.750 INCHES NOMINAL IN
NUT STYLEROUND
THREAD CLASS3B
END ITEM IDENTIFICATIONSUB ATMOSPHERE CONTROL
SUBSTITUTES & CROSS-REFERENCES 1
N5798Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy N5798 PC 22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N5798 PC 22?
N5798 PC 22 is a NUT,PLAIN,ROUND.
What parts can replace N5798 PC 22?
There is 1 known substitute for N5798 PC 22: N5798. Substitute compatibility should be verified for your specific system.
What is the NSN for N5798 PC 22?
N5798 PC 22 is cataloged in the U.S. Government catalog under NSN 5310-01-475-5406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N5798 PC 22

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.