PartsTable
Technical Data Sheet
Download PDF

N5726 PIECE 13 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N5726 PIECE 13: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 7.000 INCHES NOMINAL IN, length: 13.250 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.774 INCHES NOMINAL IN, body_thickness: 0.960 INCHES NOMINAL IN, corner_bevel_length: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-158-4598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N5726 PIECE 13
NSN: 5340-01-158-4598
FSC: 5340 — Hardware, Commercial
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
width7.000 INCHES NOMINAL IN
length13.250 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.774 INCHES NOMINAL IN
body_thickness0.960 INCHES NOMINAL IN
corner_bevel_length2.375 INCHES NOMINAL IN
peripheral_shape_styleRECTANGLE, MULTI HOLES
hole_quantity_along_width6
hole_quantity_along_length2
cross-sectional_shape_styleFLAT
mounting_opening_shape_styleUNTHREADED HOLE
corner_hole_centerline_radius0.750 INCHES NOMINAL IN
NSN5340-01-158-4598
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N5726 PIECE 13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 3.625 INCHES NOMINAL IN
•
LENGTH: 13.250 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 4.000 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 2
•
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH: 4.000 INCHES NOMINAL IN
•
CORNER BEVEL LENGTH: 2.375 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH3.625 INCHES NOMINAL IN
LENGTH13.250 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH4.000 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH2
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH4.000 INCHES NOMINAL IN
CORNER BEVEL LENGTH2.375 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
CROSS-SECTIONAL SHAPE STYLEFLAT
HOLE QUANTITY ALONG WIDTH6
CORNER HOLE CENTERLINE RADIUS0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
N5726Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N5726 PIECE 13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N5726 PIECE 13?
N5726 PIECE 13 is a COVER,ACCESS.
What parts can replace N5726 PIECE 13?
There is 1 known substitute for N5726 PIECE 13: N5726. Substitute compatibility should be verified for your specific system.
What is the NSN for N5726 PIECE 13?
N5726 PIECE 13 is cataloged in the U.S. Government catalog under NSN 5340-01-158-4598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N5726 PIECE 13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.