PartsTable
Technical Data Sheet
Download PDF

N5357 — SPINDLE,UPPER STRAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

N5357: SPINDLE,UPPER STRAINER.

The SPINDLE,UPPER STRAINER is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY, mesh_size: 80.0, body_width: 12.000 INCHES NOMINAL IN, body_height: 36.375 INCHES NOMINAL IN, body_length: 41.000 INCHES NOMINAL IN, wire_diameter: 0.007 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-155-5033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
N5357
NSN: 5340-01-155-5033
NIINs: 011555033, 011557770, 011557771, 011557835, 011557914, 011557915, 011557916, 011557917, 011557918, 011568313, 011568314, 011573628
FSC: 5340 — Hardware, Commercial
CAGE: 09032 — TATE ANDALE, LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY
mesh_size80.0
body_width12.000 INCHES NOMINAL IN
body_height36.375 INCHES NOMINAL IN
body_length41.000 INCHES NOMINAL IN
wire_diameter0.007 INCHES NOMINAL IN
special_featuresFOUR HOLES
operating_pressure120.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
filtering_media_designMESH SINGLE FILTERING MEDIA RESPONSE
peripheral_shape_styleIRREGULAR, FOUR EARS, SIX HOLES
end_item_identification5 IN. DUPLEX OIL STRAINER,TYPE 103BM,ANDALE COMPANY IN
media_for_which_designedFUEL/OIL, HYDROCARBON
NSN5340-01-155-5033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: N5357 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE HOLE QUANTITY: 12
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
PERIPHERAL SHAPE STYLE: ROUND, MULTI HOLES
•
MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
BOLT CIRCLE HOLE QUANTITY12
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
PERIPHERAL SHAPE STYLEROUND, MULTI HOLES
END ITEM IDENTIFICATIONANDALE COMPANY TYPE 103BM 5 IN. STRAINER IN
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy N5357?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is N5357?
N5357 is a SPINDLE,UPPER STRAINER.
What is the NSN for N5357?
N5357 is cataloged in the U.S. Government catalog under NSN 5340-01-155-5033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — N5357

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.